Pre Order 
EAN: 4014891091135
Price: 357,00€ + VAT
Price (VAT included): 435,54€
Contact us:
The AT4040 side-address condenser microphone features an advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics. A marriage of technical precision and artistic inspiration, the AT4040 offers exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility. This ultra-consistent microphone may be used with confidence in a wide variety of studio and live miking applications, even under the stringent demands of digital recording systems. The AT4040’s low-noise circuitry is symmetrical and transformerless, resulting in exceptional transient response and clean output signals for transparent reproduction of even the most troublesome of instruments and sound effects.
|
SPECIFICATIONS
|
|
ELEMENT
|
Externally-polarized (DC bias) condenser
|
|
POLAR PATTERN
|
Cardioid
|
|
FREQUENCY RESPONSE
|
20-20,000 Hz
|
|
LOW FREQUENCY ROLL-OFF
|
80 Hz, 12 dB/octave
|
|
OPEN CIRCUIT SENSITIVITY
|
-32 dB (25.1 mV) re 1V at 1 Pa
|
|
IMPEDANCE
|
100 ohms
|
|
MAXIMUM INPUT SOUND LEVEL
|
145 dB SPL, 1 kHz at 1% T.H.D.;
155 dB SPL, with 10 dB pad (nominal)
|
|
NOISE
|
12 dB SPL
|
|
DYNAMIC RANGE (typical)
|
133 dB, 1 kHz at Max SPL
|
|
SIGNAL-TO-NOISE RATIO
|
82 dB, 1 kHz at 1 Pa
|
|
PHANTOM POWER REQUIREMENTS
|
48V DC, 4.2 mA typical
|
|
SWITCHES
|
Flat, roll-off;
10 dB pad (nominal)
|
|
WEIGHT
|
12.7 oz (360 g)
|
|
DIMENSIONS
|
6.69" (170.0 mm) long,
2.10" (53.4 mm) maximum body diameter
|
|
OUTPUT CONNECTOR
|
Integral 3-pin XLRM-type
|
|
ACCESSORIES FURNISHED
|
AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case
|
|
AUDIO-TECHNICA CASE STYLE
|
R1
|
-
Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics
-
Externally polarized (DC bias) true condenser design
-
Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility
-
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
-
Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
-
Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
-
State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
-
Custom shock mount provides superior isolation
-
Switchable 80 Hz hi-pass filter and 10 dB pad
For more information, please visit this products
webpage.
Live chat