Sound Devices HX-3 Amplificatore/distributore di cuffie

Mod:[SD-HX3] Prod: Sound Devices
Non Disponibile
Prezzo: 490,00€ + IVA
E-mail Live Chat Stampa

HX-3 Amplificatore/Distributore per cuffie, alimentazione a batterie.

E' il perfetto accessorio per produrre 3 uscite stereo per cuffie di alta qualità con 3 controlli di volume individuali. Amplifica e distribuisce il segnale proveniente da una sorgente audio a livello linea. L' HX-3 può produrre un segnale di cuffia di livello molto alto con bassissimo rumore e distorsione.


Frequency Response:10 Hz - 50 kHz, -±1.0 dB, any input to any output, gain controls set to 50%

Voltage Gain:34 dB from balanced line to headphone output, 35 dB from headphone input to headphone output

Output Clipping Level:+18 dBu minimum with 600 ohm load, +16 dBu minimum with 300 ohm load

Headphone Output Impedance:200 ohms

Input Clipping Level:XLR: +24 dBu minimum
1/4-inch and 1/8-inch inputs: +22 dBu minimum

Dynamic Range:(balanced line inputs): 120 dB minimum

THD + Noise:0.03% maximum (from 10 Hz to 22 kHz @ +10 dBu input and output level, 300 ohm load, 10 Hz - 22 kHz filter bandwidth)

Inputs:XLR: electronically balanced, 22k ohm input impedance, 1/4-inch unbalanced: 9.1k ohm impedance
1/8-inch unbalanced: 9.1k ohm impedance.
Internal Voltage Rails:
±15 V, regulated

Power Source:Internal: 2 AA alkaline batteries, 18 hours life typical with nominal levels. External: 5 - 17 VDC via threaded coaxial connector (5.5 mm outer diameter, 2.1 mm inner diameter), pin positive, sleeve negative.

Power LED:Green indicates power and good battery. Red indicates power with low batteries. LED turns red when ~ 4 hours of battery life remain.

Operating Temperature Range:0 to 70 degrees C
32 to 160 degrees F

Dimensions:43 mm x 94 mm x 140 mm (h x w x d) (1.7" x 3.7" x 5.5")

Weight:
(unit only): 0.56 kg
1.24 lbs.

Included Accessories:
1/4-inch to 1/8-inch trs interconnect cable, rubber feet (4), locking DC jack


Per maggiori informazioni visita la pagina web.

Votazione 4,67/5 (6 Voti)