Sennheiser MKH 20 P48 U

Microfono a condensatore Sennheiser MKH20 P48 U, omni.

General Description
The MKH 20 is usually used as a main microphone for orchestras and solo instruments, and picks up the natural acoustics of the room, though it does have a much wider range of applications as omni-directional microphones do not suffer from 'proximity effect'.

 

Features
	Exceptionally flat frequency response, switchable for near and diffuse field applications
	High-frequency response can be accentuated by means of a pressure build-up ring
	Slightly increasing directivity at high frequencies to adjust tonal balance
	Exceptionally low inherent self-noise
	Transformerless and fully floating balanced output
	Switchable pre-attenuation
	Black, anodised light metal body
Delivery Includes
	1 MKH 20, 1 MZS 40 shock mount,
	1 MZW 41 windshield, 1 pressure build-up ring

Technical Data
	Pick-up pattern		omni-directional
	Sensitivity in free field, no load (1kHz)		25 mV/Pa +- 1 dB
	Nominal impedance		150 Ohm
	Min. terminating impedance		1000 Ohm
	Equivalent noise level		10 (18) dB
	Equivalent noise level weighted as per CCIR 468-3		20 (28) dB
	Power supply		Phantom 48 +- 4 V
	Current consumption		2 mA
	Dimensions		d 25 x 153 mm
	Weight		ca. 100 g

Profile

Omni-directional studio microphone with switchable diffusefield correction, switchable pre-attenuation and pressure build-up ring, frequency response 12 Hz -20,000 Hz, sensitivity (free field, no load) 25 (8) mV/Pa ± 1 dB at 1 kHz, nominal impedance 150 Ohm, min. terminating impedance 1 kOhm, equivalent noise level A-weighted 10 (18) dB, CCIR-weighted 20 (28) dB, max. SPL 134 (142) dB at 1 kHz, phantom powering 48 ± 4 V, supply current 2 mA, dimensions in mm Ø 25 x 153, weight approx. 100 g. Values in parentheses with attenuator switched on (–10 dB).

For more information, please visit this products webpage.

• 1
• 2
• 3
• 4
• 5