Price: 1.460,00€ + VAT
Price (VAT included): 1.781,20€
This item is included in the list of the Top 30 Best Sellers
The Lectrosonics SSM is ideal in theatrical or any other production where concealment in costuming is required. In spite of its tiny size, the transmitter offers an extensive feature set and performance on par with all of the Digital Hybrid Wireless® models.
Frequencies are selectable in 100 kHz or 25 kHz steps across a maximum tuning range of 76.7 MHz. This yields a total of 3072 available frequencies across three standard frequency blocks. The tuning range varies in other blocks to meet applicable frequency allocations.
Chiedere la disponibilità sulla Banda di Frequenza di proprio interesse.
The servo bias input accepts mic or line level signals with a wide range of gain adjustment in 1 dB steps. Accurate LED indications on the keypad allow precise gain adjustments to be made for the maximum signal to noise ratio and minimum distortion. The limiter in the preamp can cleanly handle signal peaks over 30 dB above full modulation, allowing the input gain to be set high enough to achieve the maximum signal to noise ratio, yet provide protection against input overload.
Compatibility with earlier analog Lectrosonics receivers, Lectrosonics IFB receivers and some receivers from other manufacturers is provided by DSP emulation modes selected in the LCD menu.
The SSM features an all-metal housing and uses the rugged, industry standard Lemo 3-pin microphone connector common to other bodypack transmitters used extensively in theatrical and TV applications.
Thus, existing lavaliere and headworn microphones already terminated with this connector can be used with the SSM without an adapter.
Different bias voltages and termination impedances can be selected via the transmitter's menu for optimum performance with a wide range of microphones.
Pre-set values for several microphones are included as menu choices for DPA, Countryman B6/E6, Sanken COS-11, Sennheiser MKE1/MKE2, along with standard dynamic microphones and line-level input sources.
- Tunable across three standard frequency blocks (76.8 MHz)
- Digital Hybrid Wireless® audio for compandor-free digital quality
- Selectable 25 or 50 mW RF power
- Compatibility modes for use with analog receivers
- 25 or 100 kHz tuning steps for up to 3072 selectable frequencies
- Wide range input gain control in 1 dB steps
- Quick change Lithium-ion rechargeable battery
- Audio coupled remote control
Specifications Operating Frequencies:
Block A1: 470.100 - 537.575 MHz (Blk 470-19-20)
Block B1: 537.600 - 614.375 MHz (Blk 21-22-23)
1 - 26995 Antenna DOWN Belt Clip
1 – 27079 Antenna UP Belt Clip
1 – 35939 Pouch
1 – 40101 NP-50 Lithium Battery
3 – P1311 USB Port Plug
For more information, please visit this products webpage