Lectrosonics Bundle DSQD 4 Channel Receiver w/ 4x DBU AES Transmitter

  • Lectrosonics Bundle DSQD 4 Channel Receiver w/ 4x DBU AES Transmitter
  • Lectrosonics Bundle DSQD 4 Channel Receiver w/ 4x DBU AES Transmitter
  • Lectrosonics Bundle DSQD 4 Channel Receiver w/ 4x DBU AES Transmitter
  • Lectrosonics Bundle DSQD 4 Channel Receiver w/ 4x DBU AES Transmitter
  • Lectrosonics Bundle DSQD 4 Channel Receiver w/ 4x DBU AES Transmitter
Pre Order

Price: 13.300,00€ + VAT
Price (VAT included): 16.226,00€


Model: [KDSQD4DBU]
Manutacturer: Lectrosonics

Contact us:

Rated 5/5 (1 Vote)


Bundle Lectrosonics DSQD composed of:
1x DSQD Ricevitore 4 Canali sia in versione AES che versione DANTE (stesso prezzo)
4x DBU Trasmittente digitale

The Lectrosonics DSQD/AES3 Half Rack Receiver with analog and digital AES3 audio outputs utilizes the Lectrosonics signature digital architecture with remarkable audio quality and ultra-low latency. The receiver includes an extended operating range rivaling the best analog and Digital Hybrid Wireless® systems with continuously tunable tracking filters covering 470.100 - 614.375 MHz.


The DSQD Receiver is a four-channel design with a host mainframe that contains the DSP, microprocessor, antenna multicoupler and control interface. The system is compatibile with transmitters of DUET, SM, LT, HM, SSM, HH UM400(a), LM, MM, and WM series!

Antenna ports on the rear panel accept input from remote antennas, with a “loop-thru” output to another mainframe using the internal multicoupler. A kit is also available to mount antenna inputs (BNC connectors) on the front panel.

Specifications
Operating Spectrum: 470.100 - 614.375 MHz
Frequency Adjustment Range: 25 kHz steps
Sampling Size and Rate: 24-bit, 48 kHz
Digital Modulation: 8PSK with Forward Error Correction
Data Encoding: Proprietary ADPCM Encryption: AES 256-CTR (per FIPS 197 and FIPS 140-2)
Latency: Digital Source: 1.0 ms plus Dante network
Analog Source: 85 dB
Diversity Technique: Noiseless antenna switching
Sensitivity: -98 dBm for 10-5 BER
Antenna Inputs/Outputs: Dual BNC female, 50 ohm impedance
Audio Outputs: XLR: Balanced, -35 to +8 dBu
Headphone: 1/4 inch phone jack
Digitale Outputs: 2x AES3
External DC Power: 7 to 18 VDC; 2.5A (max)
Weight: 1.95 lbs.; 880 grams
Dimensions: 8.375 x 1.75 x 7.375 in. 213 x 44.5 x 187 mm

The Lectrosonics DBu transmitter is a second generation design with specially developed, high efficiency digital circuitry for extended operating time on two AA batteries. The transmitter can tune in coarse or fine steps across the UHF television band from 470.100 to 607.950 MHz, with a selectable output power of 25 or 50 mW. The pure digital architecture enables AES 256-CTR encryption for high level security applications.
Studio quality audio performance is assured by high quality components in the preamp, wide range input gain adjustment and DSP-controlled limiting. Input connections and settings are included for any lavaliere microphone, dynamic microphones and line level inputs. Input gain is adjustable over a 44 dB range in 1 dB steps to allow an exact match to the input signal level, maximizing the dynamic range and signal to noise ratio.
Specifications:
  • Operating Frequencies: 470.100 - 607.950 MHz
  • Frequency Selection Steps: 25 kHz
  • RF Power output: Selectable; 25 or 50 mW


 

For more information, please visit this products webpage.