Mixer TW LP4 32, 3-in, 2-out

TW LP4 32 is a compact, portable three-channel unit designed for electronic news gathering (ENG) quality sound mixing in a motion picture or television film.

• Frequency response: 20 Hz – 20 kHz ± 2 dB
• Distortion: less than 0.2 % THD
• S/N ratio > 65 dB (EIN: –125 dBv)
• Maximum output level: +18 dBu
• Low-cut filter: 80 or 160 Hz, 14 dB / octave
• Internal batteries: AA cells
• Size: 205 × 131 × 65 mm (8.1 × 5.2 × 2.6 in)
• Weight: 1,3 kg (2.9 lbs)

• Battery / External power switch
• PWR LED: lights when power is on, flashes for low power
• Two headphone jacks
• Peak modulometers always show the level set, while meter LEDs, if limiter is on for the channel, indicate when gain reduction is occurring
• Slate microphone pushbutton
• Headphone monitoring selector
• Reference 1 kHz sine wave generator switch
• Battery test pushbutton
• Pan switches: Right, Mono, Left, Stereo – channels 1 & 2 can be independently linked for stereo mode
• Limiter switch
• Direct / Tape switch for return 1 & 2
• Three-position low-cut filter switches (80 or 160 Hz, 14 dB / octave)
• Pre-fade listen

• Three balanced XLR inputs
• Mic power selectors 48V, 12V, T
• Mic / Line level switches
• Attenuation –10 dB pad
• Phase reverse channel 2
• Phantom power on-off switch

• 3 pin XLR transformer balanced left and right outputs
• Hirose 10 pin connector for camera and return 1
• Mic / Line switches, RTN return select switch
• 3.5 Jack monitor in for tape return from camera
• 5 pin XLR unbalanced outputs and return 2
• 4 pin XLR connector for charger and external power