Il mixer compatto portatile TWELCO TW LP444 è stato progettato per un registratore o telecamera a 4 tracce. L'unità ha 4 ingressi ed è possibile selezionare 2 o 4 uscite.
SPECIFICHE TECNICHE
- Frequency response: 20 Hz – 20 kHz ± 2 dB
- Distortion: less than 0.2 % THD
- S/N ratio > 65 dB (EIN: –125 dBv)
- Maximum output level: +18 dBu
- Low-cut Filters: 80 or 160 Hz, 14 dB / octave
- ? Internal batteries:SON.NP-550 BatteryPack or AA cells
- ? Size: 255 x 165 x 65 mm - 10 x 6.5 x 2.6 in
- Weight: 2,0 kg (4.5 lbs) without batteries
FRONT PANEL
- 4 / 4 switch: with channel 1 switched in L, channel 2 switched in R, the four inputs can be controlled independently to the four outputs
- PWR LED: lights when power is on, flashes for low power
- Two headphone jacksPeak modulometers always show the level set, while meter LEDs, if limiter is on for the channel, indicate when gain reduction is occurring
- Slate microphone pushbutton
- Headphone monitoring selector
- Reference 1 kHz sine wave generator switch
- Battery test pushbutton
- Pan switches: Right, Mono, Left, Stereo – channels 1 & 2 can be independently linked for stereo mode
- Limiter switches separately for each channel
- Direct / Tape switch for return 1 & 2
- Low-cut filter switches
- Pre-fade listen pushbuttons
- Master fader
INPUT PANEL
- ?Four balanced XLR inputs
- Mic power selectors 48V, 12V, T
- Mic / Line level switches
- Attenuation –10 dB pad
- Phase reverse channel 2 & 4
- Phantom power on-off switch
OUTPUT PANEL
- Four XLR transformer balanced outputs
- Hirose 10 pin connector to camera
- Neutrik 4 pin connector for charger and external power
- Mic / Line switches, RTN return select switch
- Mono mix output TA3M connector
- 3.5 Jack monitor in for tape return from camera
- Unbalanced Post Fader Outputs TA5M connector
- Direct Channel Pre-Fader Outputs TA5M connector
Votazione 0/5 (Senza Voti)
Live chat