RADIUS 5cm Microphone Foam, 19/22mm and 24/25mm

RADIUS 5cm Microphone windshield Foam

The Radius range of condenser and shotgun microphone foams are made from high-quality acoustic foam designed to prevent plosives, boom swings swooshes and other light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. For shotgun microphones, the tapered foam is wider in the back to provide more side wind protection around the capsule. The foam narrows toward the front to provide additional protection around the interference tube whilst allowing for maximum transparency. These foams come in 3 internal diameter sizes and a variety of lengths to fit many broadcast, camera and recording microphones.

Fits: AKG C451 | AudioTechnica AT4022, BP3600 | BeyerDynamic MC930, MC950 | DPA 4006A, 4011A, 4015A, 4018A | Neumann KM184 | Rode NT5, NT55 | Schoeps CMC6 + MK4, MK5 or MK41:
FWS-00001 5cm Mic Foam, 19/22mm

Fits: Sennheiser MKH20, MKH30, MKH40, MKH50 | Sony ECM-MS2
FWS-00018 5cm Mic Foam, 24/25mm

Fits other small pencil condenser and instrument microphones 1with slots less than 5cm from end of mic and that have standard length preamps 

For more information, please visit this products webpage.