LP444 Portable Mixer 4in/4out

TW LP444 is a compact portable 4 in / 2 out and switchable 4 in / 4 out unit designed for four-track recorder or camera.

SPECIFICATION

• Frequency response: 20 Hz – 20 kHz ± 2 dB
• Distortion: less than 0.2 % THD
• S/N ratio > 65 dB (EIN: –125 dBv)
• Maximum output level: +18 dBu
• Low-cut Filters: 80 or 160 Hz, 14 dB / octave
• ? Internal batteries:SON.NP-550 BatteryPack or AA cells
• ? Size:       255 x 165 x 65 mm - 10 x 6.5 x 2.6 in
• Weight: 2,0 kg (4.5 lbs) without batteries

FRONT PANEL

• 4 / 4 switch: with channel 1 switched in L, channel 2 switched in R, the four inputs can be controlled independently to the four outputs
• PWR LED: lights when power is on, flashes for low power
• Two headphone jacksPeak modulometers always show the level set, while meter LEDs, if limiter is on for the channel, indicate when gain reduction is occurring
• Slate microphone pushbutton
• Headphone monitoring selector
• Reference 1 kHz sine wave generator switch
• Battery test pushbutton
• Pan switches: Right, Mono, Left, Stereo – channels 1 & 2 can be independently linked for stereo mode
• Limiter switches separately for each channel
• Direct / Tape switch for return 1 & 2
• Low-cut filter switches
• Pre-fade listen pushbuttons
• Master fader

INPUT PANEL

• ?Four balanced XLR inputs
• Mic power selectors 48V, 12V, T
• Mic / Line level switches
• Attenuation –10 dB pad
• Phase reverse channel 2 & 4
• Phantom power on-off switch

OUTPUT PANEL

• Four XLR transformer balanced outputs
• Hirose 10 pin connector to camera
• Neutrik 4 pin connector for charger and external power
• Mic / Line switches, RTN return select switch
• Mono mix output TA3M connector
• 3.5 Jack monitor in for tape return from camera
• Unbalanced Post Fader Outputs TA5M connector
• Direct Channel Pre-Fader Outputs TA5M connector