Price: 335,00€ + VAT
Price (VAT included): 408,70€
The d:screet™ 4061 Omnidirectional Microphone, Lo-Sens offers a very clean, detailed and natural sound quality.
Originally designed for use with wireless systems in theater, television and close-miked instrument applications, the DPA d:screet™ 4061 Miniature Omnidirectional Microphone, Lo-Sens is highly unobtrusive. Because of its small size, it exhibits an exceedingly accurate omnidirectional pattern and therefore does not need to be aimed directly at the sound source to achieve quality pickup.
This microphone is acoustically identical to the d:screet™ 4060 Miniature Omnidirectional Microphone, Hi-Sens, but the sensitivity is adjusted to match some of the more sensitive transmitters on the market.
It is up to the user to decide on the correct placement to achieve the desired timbre. The mic can handle 144 dB peak before clipping, allowing the microphone to be used even for snare drums, guitar/bass speaker cabinets or other high SPL sound sources.
Flexible adapter system
The adapters for wireless systems give you flexible, simple and affordable possibilities. You are no longer bound to one wireless system. As circumstances change, you can just switch your adapter, instead of incurring the cost of a whole new microphone. And when you make the switch, you won't hear any loss or change in sound quality.
The d:fine™, d:screet™ and d:vote™ series of miniature microphones work with all leading wireless mic solutions, such as Lectrosonics, Sennheiser, Shure, Sony, Wisycom, Zaxcom and many more. DPA Microphones’ ingenious adapter system is one of a kind in the industry. It protects your investment in fantastic sound for years to come.
SC4061-BM : d:screet Omni Mic, Lo-Sens, Black, MicroDot
SC4061-CM : d:screet Omni Mic, Lo-Sens, Brown, MicroDot
SC4061-FM : d:screet Omni Mic, Lo-Sens, Beige, MicroDot
SC4061-WM : d:screet Omni Mic, Lo-Sens, White, MicroDot
d:screet™ 4061 MINIATURE OMNIDIRECTIONAL MICROPHONE, LO-SENS
Directional characteristics: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser element with vertical diaphragm
Frequency range, ± 2 dB: Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz.
Sensitivity, nominal, ± 3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): 68 dB(A)
Total Harmonic Distortion (THD): < 1 % THD up to 123 dB SPL peak; < 1 % THD up to 120 dB SPL RMS sine
Dynamic range: Typ. 97 dB
Max. SPL, peak before clipping: 144 dB
Output impedance: 30 - 40 Ω
Cable drive capability: Up to 300 m (984 ft)
Power supply: For wireless systems: Min. 5 V - max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance.
Color: Black, beige, brown or white
Weigh: 7.5 g (0.26 oz) incl. cable and MicroDot connector
Microphone diameter: 5.4 mm (0.21 in)
Microphone length: 12.7 mm (0.5 in)
Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin
Cable length: 1.8 m (5.9 ft)
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH): Up to 90%
For more information, please visit this products webpage